[printer SJT S1 OF]
z_babystep_values: 0.05, 0.1
 Bed Screws
# define the screw positons required for odd number of screws in a comma separated list (CSV)
# possible values are: bl, br, bm, fl, fr, fm, lm, rm, center
# they correspond to back-left, back-right, back-middle, front-left, front-right, front-middle, left-middle, right-middle
# example:
screw_positions: bl, fl, rm
#printer.bltouch # Available if bltouch section defined in config

[main]
use_default_menu: false
[menu __main homing]
name: Home
icon: home
method: printer.gcode.script
params: {"script":"G28"}
[menu __main disable]
name: Disable Motor
icon: motor-off
method: printer.gcode.script
params: {"script":"M84"}

[menu __main temperature]
name: Temperature
icon: heat-up
panel: temperature

[menu __main extrude]
name: Extrude
icon: extrude
panel: extrude

[menu __main calibrate]
name: Calibrate
icon: settings

[menu __main calibrate inputshaper]
name: Input Shaper
icon:  move
#method: printer.gcode.script
#params: {"script":"TEST_RESONANCES AXIS=X"}
panel: input_shaper

[menu __main calibrate bed_leveling]
name: Bed Level
icon: bed-level
panel: bed_level

[menu __main calibrate bed_mesh]
name: Bed Mesh
icon: bed-mesh
panel: bed_mesh
[menu __main calibrate z_calibrate]
name: Z Calibrate
icon: z-tilt
panel: zcalibrate
[menu __main settings]
name: Settings
icon: settings
[menu __main settings limits]
name: Limits
icon: fine-tune
panel: limits
[menu __main settings retraction]
name: Retraction
icon: retraction
panel: retraction
[menu __main settings spoolman]
name: Filament
icon: spool
panel: spoolman
[menu __main settings console]
name: Console
icon: console
panel: console
[menu __main settings system]
name: System
icon: info
panel: system
[menu __main settings save_config]
name: Save Config
icon: sd
method: printer.gcode.script
params: {"script":"save_config"}
[menu __main settings klipper_screen]
name: Klipper Screen
icon: klipper
panel: example
[menu __main settings network]
name: Network
icon: network
panel: network
[menu __main settings notifications]
name: Notifications
icon: notifications
panel: notifications
[menu __main settings Macros]
name: Macros
icon: custom-script
panel: macros
[menu __main settings LED]
name: LED
icon: light
panel: led

[menu __main settings FAN]
name: FAN
icon: fan
panel: fan
[menu __main settings move]
name: Move
icon: move
panel: move
#[menu __main Leveloption]
#name: Bed Leveling Options
#icon: print
#method: printer.gcode.script
#params: {"script":"SHOW_PROMPT"}
[menu __main print]
name: Print
icon: print
panel: print
#Materials
[preheat PLA]
extruder: 220
#extruder1: 60
heater_bed: 40
# Use the name
#chamber: 60
# or the full name
#heater_generic chamber: 60
# or for example apply the same temp to devices of the same type
#temperature_fan: 40
#heater_generic: 60
# optional GCode to run when the option is selected
gcode: #MY_HEATSOAK_MACRO
[preheat PETg]
extruder: 240
#extruder1: 60
heater_bed: 60
# Use the name
#chamber: 60
# or the full name
#heater_generic chamber: 60
# or for example apply the same temp to devices of the same type
#temperature_fan: 40
#heater_generic: 60
# optional GCode to run when the option is selected
gcode: #MY_HEATSOAK_MACRO

#~# --- Do not edit below this line. This section is auto generated --- #~#
#~#
#~# [main]
#~# theme = material-dark
#~# print_estimate_method = slicer
#~# screen_blanking = 60
#~# autoclose_popups = False
#~# show_scroll_steppers = True
#~# auto_open_extrude = False
#~# print_sort_dir = date_desc
#~# print_view = list
#~# 
#~# [graph SJT S1 OF]
#~# extruder = False
#~#